StockFetcher Forums · Filter Exchange · THE MIGHTY RIGGS HAS DONE IT AGAIN PART II<< 1 2 >>Post Follow-up
rtucker
318 posts
msg #42185
Ignore rtucker
3/18/2006 1:10:06 PM

Looks like he finally got it! Duh ?

Now, no more of this and go back to writing filters. Just less commentary please.

Just remember, I was investing/ trading while you were prancing on the warm green grass , on an early summers day, arms outstretched, leaping for butterflies.


WALLSTREETGENIUS
983 posts
msg #42115
Ignore WALLSTREETGENIUS
modified
4/23/2006 7:28:11 AM

I can only imagine what the bashers have to say about 44-1 and now 64-10. That's a combined 108 winners and only 11 losers for a 90.6 winning percentage. That means in one week, my two filters again spit out 108 winners out of 119 total!!! Here's the 64-10 for the week of 3/6/06 thru 3/14/06....

**** THE MIGHTY RIGGS DIVERGENCE FILTER ****


OFFSET 7-DAYS:

Fetcher[close is above 20
close is below open
RSI(2)is above RSI(2)2 days ago
and RSI(2)is decreasing 1 day
60-day slope of close is above 0
Do not draw 60-day slope of close
Draw EMA(13)
Set{Bullpower, high minus ema(13)}
Set{Bearpower, low minus ema(13)}
set{BLb,days(BullPower is above BullPower 1 day ago,100)}
set{BLa,days(BullPower is below BullPower 1 day ago,100)}
set{BLxBL, BLa - BLb}
set{BRb,days(BearPower is above BearPower 1 day ago,100)}
set{BRa,days(BearPower is below BearPower 1 day ago,100)}
set{BRxBR, BRa - BRb}
Draw Bullpower
Draw Bearpower
add column BLxBL
add column BRxBR
Draw Bullpower
Draw Bearpower
average volume(90)is above 100000
volume is above 100000
sort column 2 descending
offset date is 3/8/06


/* MP CCIWLR ANALYZER DISPLAY */

/* NORMALIZE accumulation distribution */

set{adval, INDPOSITION(accumulation distribution, 60) * 100 }

/* NORMALIZE momentum(12) */

set{moval, INDPOSITION(momentum(12), 60) * 100}

/* NORMALIZE CCI(14) */

set{ccval, INDPOSITION(CCI(14), 60) * 100 }

/* NORMALIZE williams %r(10) */

set{wrval, INDPOSITION(williams %r(10), 60) * 100 }


/* DRAW THE MP CCIWLR CHART */

and draw wrval
and draw adval on plot wrval
and draw moval on plot wrval
and draw ccval on plot wrval

add column adval
add column ccval
add column moval
add column wrval

adval is above 80
ccval is below 30
moval is below 30
wrval is below 30
]




OFFSET 6-DAYS:

Fetcher[close is above 20
close is below open
RSI(2)is above RSI(2)2 days ago
and RSI(2)is decreasing 1 day
60-day slope of close is above 0
Do not draw 60-day slope of close
Draw EMA(13)
Set{Bullpower, high minus ema(13)}
Set{Bearpower, low minus ema(13)}
set{BLb,days(BullPower is above BullPower 1 day ago,100)}
set{BLa,days(BullPower is below BullPower 1 day ago,100)}
set{BLxBL, BLa - BLb}
set{BRb,days(BearPower is above BearPower 1 day ago,100)}
set{BRa,days(BearPower is below BearPower 1 day ago,100)}
set{BRxBR, BRa - BRb}
Draw Bullpower
Draw Bearpower
add column BLxBL
add column BRxBR
Draw Bullpower
Draw Bearpower
average volume(90)is above 100000
volume is above 100000
sort column 2 descending
offset date is 3/9/06


/* MP CCIWLR ANALYZER DISPLAY */

/* NORMALIZE accumulation distribution */

set{adval, INDPOSITION(accumulation distribution, 60) * 100 }

/* NORMALIZE momentum(12) */

set{moval, INDPOSITION(momentum(12), 60) * 100}

/* NORMALIZE CCI(14) */

set{ccval, INDPOSITION(CCI(14), 60) * 100 }

/* NORMALIZE williams %r(10) */

set{wrval, INDPOSITION(williams %r(10), 60) * 100 }


/* DRAW THE MP CCIWLR CHART */

and draw wrval
and draw adval on plot wrval
and draw moval on plot wrval
and draw ccval on plot wrval

add column adval
add column ccval
add column moval
add column wrval

adval is above 80
ccval is below 30
moval is below 30
wrval is below 30
]




OFFSET 5-DAYS:

Fetcher[close is above 20
close is below open
RSI(2)is above RSI(2)2 days ago
and RSI(2)is decreasing 1 day
60-day slope of close is above 0
Do not draw 60-day slope of close
Draw EMA(13)
Set{Bullpower, high minus ema(13)}
Set{Bearpower, low minus ema(13)}
set{BLb,days(BullPower is above BullPower 1 day ago,100)}
set{BLa,days(BullPower is below BullPower 1 day ago,100)}
set{BLxBL, BLa - BLb}
set{BRb,days(BearPower is above BearPower 1 day ago,100)}
set{BRa,days(BearPower is below BearPower 1 day ago,100)}
set{BRxBR, BRa - BRb}
Draw Bullpower
Draw Bearpower
add column BLxBL
add column BRxBR
Draw Bullpower
Draw Bearpower
average volume(90)is above 100000
volume is above 100000
sort column 2 descending
offset date is 3/10/06


/* MP CCIWLR ANALYZER DISPLAY */

/* NORMALIZE accumulation distribution */

set{adval, INDPOSITION(accumulation distribution, 60) * 100 }

/* NORMALIZE momentum(12) */

set{moval, INDPOSITION(momentum(12), 60) * 100}

/* NORMALIZE CCI(14) */

set{ccval, INDPOSITION(CCI(14), 60) * 100 }

/* NORMALIZE williams %r(10) */

set{wrval, INDPOSITION(williams %r(10), 60) * 100 }


/* DRAW THE MP CCIWLR CHART */

and draw wrval
and draw adval on plot wrval
and draw moval on plot wrval
and draw ccval on plot wrval

add column adval
add column ccval
add column moval
add column wrval

adval is above 80
ccval is below 30
moval is below 30
wrval is below 30
]




OFFSET 4-DAYS:

Fetcher[close is above 20
close is below open
RSI(2)is above RSI(2)2 days ago
and RSI(2)is decreasing 1 day
60-day slope of close is above 0
Do not draw 60-day slope of close
Draw EMA(13)
Set{Bullpower, high minus ema(13)}
Set{Bearpower, low minus ema(13)}
set{BLb,days(BullPower is above BullPower 1 day ago,100)}
set{BLa,days(BullPower is below BullPower 1 day ago,100)}
set{BLxBL, BLa - BLb}
set{BRb,days(BearPower is above BearPower 1 day ago,100)}
set{BRa,days(BearPower is below BearPower 1 day ago,100)}
set{BRxBR, BRa - BRb}
Draw Bullpower
Draw Bearpower
add column BLxBL
add column BRxBR
Draw Bullpower
Draw Bearpower
average volume(90)is above 100000
volume is above 100000
sort column 2 descending
offset date is 3/13/06


/* MP CCIWLR ANALYZER DISPLAY */

/* NORMALIZE accumulation distribution */

set{adval, INDPOSITION(accumulation distribution, 60) * 100 }

/* NORMALIZE momentum(12) */

set{moval, INDPOSITION(momentum(12), 60) * 100}

/* NORMALIZE CCI(14) */

set{ccval, INDPOSITION(CCI(14), 60) * 100 }

/* NORMALIZE williams %r(10) */

set{wrval, INDPOSITION(williams %r(10), 60) * 100 }


/* DRAW THE MP CCIWLR CHART */

and draw wrval
and draw adval on plot wrval
and draw moval on plot wrval
and draw ccval on plot wrval

add column adval
add column ccval
add column moval
add column wrval

adval is above 80
ccval is below 30
moval is below 30
wrval is below 30
]




OFFSET 3-DAYS:

Fetcher[close is above 20
close is below open
RSI(2)is above RSI(2)2 days ago
and RSI(2)is decreasing 1 day
60-day slope of close is above 0
Do not draw 60-day slope of close
Draw EMA(13)
Set{Bullpower, high minus ema(13)}
Set{Bearpower, low minus ema(13)}
set{BLb,days(BullPower is above BullPower 1 day ago,100)}
set{BLa,days(BullPower is below BullPower 1 day ago,100)}
set{BLxBL, BLa - BLb}
set{BRb,days(BearPower is above BearPower 1 day ago,100)}
set{BRa,days(BearPower is below BearPower 1 day ago,100)}
set{BRxBR, BRa - BRb}
Draw Bullpower
Draw Bearpower
add column BLxBL
add column BRxBR
Draw Bullpower
Draw Bearpower
average volume(90)is above 100000
volume is above 100000
sort column 2 descending
offset is 3/14/06


/* MP CCIWLR ANALYZER DISPLAY */

/* NORMALIZE accumulation distribution */

set{adval, INDPOSITION(accumulation distribution, 60) * 100 }

/* NORMALIZE momentum(12) */

set{moval, INDPOSITION(momentum(12), 60) * 100}

/* NORMALIZE CCI(14) */

set{ccval, INDPOSITION(CCI(14), 60) * 100 }

/* NORMALIZE williams %r(10) */

set{wrval, INDPOSITION(williams %r(10), 60) * 100 }


/* DRAW THE MP CCIWLR CHART */

and draw wrval
and draw adval on plot wrval
and draw moval on plot wrval
and draw ccval on plot wrval

add column adval
add column ccval
add column moval
add column wrval

adval is above 80
ccval is below 30
moval is below 30
wrval is below 30
]




OFFSET 2-DAYS

Fetcher[close is above 20
close is below open
RSI(2)is above RSI(2)2 days ago
and RSI(2)is decreasing 1 day
60-day slope of close is above 0
Do not draw 60-day slope of close
Draw EMA(13)
Set{Bullpower, high minus ema(13)}
Set{Bearpower, low minus ema(13)}
set{BLb,days(BullPower is above BullPower 1 day ago,100)}
set{BLa,days(BullPower is below BullPower 1 day ago,100)}
set{BLxBL, BLa - BLb}
set{BRb,days(BearPower is above BearPower 1 day ago,100)}
set{BRa,days(BearPower is below BearPower 1 day ago,100)}
set{BRxBR, BRa - BRb}
Draw Bullpower
Draw Bearpower
add column BLxBL
add column BRxBR
Draw Bullpower
Draw Bearpower
average volume(90)is above 100000
volume is above 100000
sort column 2 descending
offset date is 3/15/06


/* MP CCIWLR ANALYZER DISPLAY */

/* NORMALIZE accumulation distribution */

set{adval, INDPOSITION(accumulation distribution, 60) * 100 }

/* NORMALIZE momentum(12) */

set{moval, INDPOSITION(momentum(12), 60) * 100}

/* NORMALIZE CCI(14) */

set{ccval, INDPOSITION(CCI(14), 60) * 100 }

/* NORMALIZE williams %r(10) */

set{wrval, INDPOSITION(williams %r(10), 60) * 100 }


/* DRAW THE MP CCIWLR CHART */

and draw wrval
and draw adval on plot wrval
and draw moval on plot wrval
and draw ccval on plot wrval

add column adval
add column ccval
add column moval
add column wrval

adval is above 80
ccval is below 30
moval is below 30
wrval is below 30
]




OFFSET 1-DAY:

Fetcher[close is above 20
close is below open
RSI(2)is above RSI(2)2 days ago
and RSI(2)is decreasing 1 day
60-day slope of close is above 0
Do not draw 60-day slope of close
Draw EMA(13)
Set{Bullpower, high minus ema(13)}
Set{Bearpower, low minus ema(13)}
set{BLb,days(BullPower is above BullPower 1 day ago,100)}
set{BLa,days(BullPower is below BullPower 1 day ago,100)}
set{BLxBL, BLa - BLb}
set{BRb,days(BearPower is above BearPower 1 day ago,100)}
set{BRa,days(BearPower is below BearPower 1 day ago,100)}
set{BRxBR, BRa - BRb}
Draw Bullpower
Draw Bearpower
add column BLxBL
add column BRxBR
Draw Bullpower
Draw Bearpower
average volume(90)is above 100000
volume is above 100000
sort column 2 descending
offset date is 3/16/06


/* MP CCIWLR ANALYZER DISPLAY */

/* NORMALIZE accumulation distribution */

set{adval, INDPOSITION(accumulation distribution, 60) * 100 }

/* NORMALIZE momentum(12) */

set{moval, INDPOSITION(momentum(12), 60) * 100}

/* NORMALIZE CCI(14) */

set{ccval, INDPOSITION(CCI(14), 60) * 100 }

/* NORMALIZE williams %r(10) */

set{wrval, INDPOSITION(williams %r(10), 60) * 100 }


/* DRAW THE MP CCIWLR CHART */

and draw wrval
and draw adval on plot wrval
and draw moval on plot wrval
and draw ccval on plot wrval

add column adval
add column ccval
add column moval
add column wrval

adval is above 80
ccval is below 30
moval is below 30
wrval is below 30
]





OFFSET 0-DAYS

Fetcher[close is above 20
close is below open
RSI(2)is above RSI(2)2 days ago
and RSI(2)is decreasing 1 day
60-day slope of close is above 0
Do not draw 60-day slope of close
Draw EMA(13)
Set{Bullpower, high minus ema(13)}
Set{Bearpower, low minus ema(13)}
set{BLb,days(BullPower is above BullPower 1 day ago,100)}
set{BLa,days(BullPower is below BullPower 1 day ago,100)}
set{BLxBL, BLa - BLb}
set{BRb,days(BearPower is above BearPower 1 day ago,100)}
set{BRa,days(BearPower is below BearPower 1 day ago,100)}
set{BRxBR, BRa - BRb}
Draw Bullpower
Draw Bearpower
add column BLxBL
add column BRxBR
Draw Bullpower
Draw Bearpower
average volume(90)is above 100000
volume is above 100000
sort column 2 descending
offset date is 3/17/06


/* MP CCIWLR ANALYZER DISPLAY */

/* NORMALIZE accumulation distribution */

set{adval, INDPOSITION(accumulation distribution, 60) * 100 }

/* NORMALIZE momentum(12) */

set{moval, INDPOSITION(momentum(12), 60) * 100}

/* NORMALIZE CCI(14) */

set{ccval, INDPOSITION(CCI(14), 60) * 100 }

/* NORMALIZE williams %r(10) */

set{wrval, INDPOSITION(williams %r(10), 60) * 100 }


/* DRAW THE MP CCIWLR CHART */

and draw wrval
and draw adval on plot wrval
and draw moval on plot wrval
and draw ccval on plot wrval

add column adval
add column ccval
add column moval
add column wrval

adval is above 80
ccval is below 30
moval is below 30
wrval is below 30
]




I'm feelin' MIGHTY RIGGSY!




StockFetcher Forums · Filter Exchange · THE MIGHTY RIGGS HAS DONE IT AGAIN PART II<< 1 2 >>Post Follow-up

*** Disclaimer *** StockFetcher.com does not endorse or suggest any of the securities which are returned in any of the searches or filters. They are provided purely for informational and research purposes. StockFetcher.com does not recommend particular securities. StockFetcher.com, Vestyl Software, L.L.C. and involved content providers shall not be liable for any errors or delays in the content, or for any actions taken based on the content.


Copyright 2016 - Vestyl Software L.L.C.Terms of Service | License | Questions or comments? Contact Us
EOD Data sources: DDFPlus & CSI Data Quotes delayed during active market hours. Delay times are at least 15 mins for NASDAQ, 20 mins for NYSE and Amex. Delayed intraday data provided by DDFPlus