StockFetcher Forums · Filter Exchange · WALLSTREETGENIUS / RIGGS filter/post collection<< 1 2 >>Post Follow-up
TheRumpledOne
6,407 posts
msg #65500
Ignore TheRumpledOne
7/27/2008 1:54:08 PM

We can save the filters and posts here so they don't get deleted.

This is NOT an endorcement in anyway, shape or form. It's just nice to preserve "history" to keep the record straight.

===========================================================

WALLSTREETGENIUS
modified 7/27/2008 9:28:00 AM

If you ALWAYS follow these 4 rules when it comes to a "squeeze", then you will make a fortune in your lifetime.

1. Make sure 1 of your 2 lead indicators "COG(5,3)" or "FI(2)" are pointing up. If you have both, then you are looking at an extremely strong chance of a breakout! I use "Center of gravity" COG(5,3) instead of Stochastics, because it usually turns 1-day B-4 Sto does. Get to know this indicator, because it's turning points are usually sharp and precise.

2. Bollinger Bands(10) is as flat as a board, or converging with one another (upper & lower bands)

3. And the most important of all...WEEKLY RSI(2) IS IN AN UPTREND!!! Make sure it's NOT tailing off, and I preferable like entries when it's below 50. Any higher then that...you're risking a sharp "tail off" (conslidation), or a sharp new downtrend!

4. In these tight formations, you will almost always see a 3-5 candle formation appear. Usually it's only 1 of 3. The first is the "Mat hold", and the 2nd is the "Rising Three Methods." And the 3rd is "Bullish Kicking." When you see these formations complete...get ready for a rocket ride baby!

**** This is one of the biggest secrets in all of TA! This is the one formula that works 100% of the time! But you have to get in before the W-RSI(2) turns down. In other words...don't enter when W-RSI(2) is nearing it's upper reference line. i.e...80-99. Now, reverse the formula, and you've just landed yourself the most dynamic shorting filter you will ever lay your eyes on! Especially if it's at the top of a chart...and you'll see many. ****

Now go put it to work, and come back and tell me I'm wrong....and one other thing....to get more plays (not that you'll need em), change the "Bollinger Width(10)" to 3,4,5 or 6-Month lows etc....



- WALLSTREETGENIUS -



((( THEMIGHTYSQUEEZE FILTER )))


Fetcher[Show stocks where bollinger width(10) is at a 1 month low
do not draw bollinger width(10) 1 month low
do not draw bollinger diff(10)

Draw Bollinger bands(50,.20)
Draw Bollinger Bands(10,.10)
Draw 3-day slope of Bollinger bands(50,.20)
Draw parabolic Sar
Draw Linear Regression Indicator(20)
Draw Bollinger bands(10)

Draw COG(5,3)
Weekly RSI(2) is above Weekly RSI(2) 1-day ago
Draw Weekly RSI(2) line at 99
Draw Weekly RSI(2) line at 0
FI(2) is above FI(2) 1-day ago

NORMALIZE accumulation distribution */

set{adval, INDPOSITION(accumulation distribution, 60) * 100 }

NORMALIZE RSI(2) */

set{RSval, INDPOSITION(RSI(2), 60) * 100}

NORMALIZE williams %r(2) */

set{wrval, INDPOSITION(williams %r(2), 60) * 100 }


DRAW THE MR CCIWLR CHART

and draw adval on plot wrval
and draw rsval on plot wrval

Draw Bearpower on plot Bullpower
Draw Bullpower line at 0
Draw MACD(4,8)
Draw Williams %R(20) line at -75

volume is above 50000
sort column 3 descending
chart-time 45-days
close is above 5
offset 0

Set{Bullpower, high minus ema(13)}
Set{Bearpower, low minus ema(13)}
set{BLb,days(BullPower is above BullPower 1 day ago,100)}
set{BLa,days(BullPower is below BullPower 1 day ago,100)}
set{BLxBL, BLa - BLb}
set{BRb,days(BearPower is above BearPower 1 day ago,100)}
set{BRa,days(BearPower is below BearPower 1 day ago,100)}
set{BRxBR, BRa - BRb}

set{mhis,indposition(macd(4,8) histogram,60)}
set{mhist,macd(4,8) histogram}
set{mhisb,days(mhist is above 0, 100)}
set{mhisa,days(mhist is below 0, 100)}
set{hstxhst, mhisa - mhisb}
set{var1,count(macd(4,8) histogram 1 day ago < macd histogram(4,8),1)}
set{mhisp,days(var1 < .5,100)}
set{var11,count(macd(4,8) histogram 1 day ago > macd histogram(4,8),1)}
set{mhisn,days(var11 < .5,100)}

set{ rsiupweek, count( Weekly RSI(2) is above Weekly RSI(2) 1 week ago, 1) }

ADD COLUMN SEPARATOR
add column sector
add column industry
ADD COLUMN SEPARATOR
add column rsiupweek
add column Weekly RSI(2)
add column Weekly RSI(2) 1-day ago(1dayago)
ADD COLUMN SEPARATOR
add column FI(2)
add column FI(2) 1-day ago(1dayago)
ADD COLUMN SEPARATOR
add column PE
add column EPS
add column ROE
ADD COLUMN SEPARATOR
add column BLxBL
add column BRxBR
ADD COLUMN SEPARATOR
add column mhisp
add column mhisn
add column hstxhst
ADD COLUMN SEPARATOR
]



========================================================


WALLSTREETGENIUS
983 posts
msg #65505
Ignore WALLSTREETGENIUS
modified
7/27/2008 3:32:07 PM

Thanks for doing this for me Avery! I love the Idea, and I think ALL fanclub presidents should do this for their hero's! Thank you, and I'll throw you an 8x10 glossy for your time and efforts whenever I get the chance....


- WALLSTREETGENIUS -

WALLSTREETGENIUS
983 posts
msg #65506
Ignore WALLSTREETGENIUS
7/27/2008 3:40:15 PM

Here's another one for my biggest fan Avery...

===================================

((( THEMIGHTYRIGGS POP & DROP ))))

Fetcher[Draw COG(5,3)
Williams %R(2) 1-day ago was below -75
Williams %R(2) is above -1
Draw Williams %R(2) line at 0
Draw Williams %R(20) line at 0
Draw Williams %R(20) line at -75
Draw Volatility_Ratio line at 0.5
Draw weekly RSI(2) line at 100
Draw FI(2) line at 0

Draw Bollinger bands(50,.20)
Draw Bollinger Bands(10,.10)
Draw 3-day slope of Bollinger bands(50,.20)
Draw parabolic Sar
Draw Linear Regression Indicator(20)
Draw Bollinger bands(10)

Draw ADX(7)
Draw Bearpower on plot Bullpower
Draw Bullpower line at 0
Draw MACD(4,8)

volume is above 50000
sort column 10 ascending
chart-time 45-days
close is above 1
offset 0

set{true_range, average true range(1)}
set{ema_true_range, CEMA(average true range(1), 14)}
set{volatility_ratio, true_range / ema_true_range}
set{volatility_ratio_count, count(volatility_ratio is above 2.0, 100)}

Set{Bullpower, high minus ema(13)}
Set{Bearpower, low minus ema(13)}
set{BLb,days(BullPower is above BullPower 1 day ago,100)}
set{BLa,days(BullPower is below BullPower 1 day ago,100)}
set{BLxBL, BLa - BLb}
set{BRb,days(BearPower is above BearPower 1 day ago,100)}
set{BRa,days(BearPower is below BearPower 1 day ago,100)}
set{BRxBR, BRa - BRb}

SET{VMACDD,MACD(4,8) histogram}
set{mhis,indposition(macd(4,8) histogram,60)}
set{mhist,macd(4,8) histogram}
set{mhisb,days(mhist is above 0, 100)}
set{mhisa,days(mhist is below 0, 100)}
set{hstxhst, mhisa - mhisb}
set{var1,count(macd(4,8) histogram 1 day ago < macd histogram(4,8),1)}
set{mhisp,days(var1 < .5,100)}
set{var11,count(macd(4,8) histogram 1 day ago > macd histogram(4,8),1)}
set{mhisn,days(var11 < .5,100)}

set{ upweek, count( weekly close above weekly open, 1) }

ADD COLUMN SEPARATOR
add column sector
add column industry
ADD COLUMN SEPARATOR
add column Williams %R(2)
add column Williams %R(2) 1-day ago(1dayago)
ADD COLUMN SEPARATOR
add column volatility_ratio
add column volatility_ratio 1-day ago(1dayago)
ADD COLUMN SEPARATOR
add column PE
add column EPS
add column ROE
ADD COLUMN SEPARATOR
add column mhisp
add column mhisn
add column hstxhst
ADD COLUMN SEPARATOR
and add column VMACDD
and add column VMACDD 1-day ago(1dayago)
and add column VMACDD 2-days ago(2daysago)
ADD COLUMN SEPARATOR
add column upweek
ADD COLUMN SEPARATOR
]




luc1grunt
622 posts
msg #65517
Ignore luc1grunt
7/27/2008 7:53:48 PM

A true professional marine.....(my ass).

Thanks Avery, glad to see you saved and posted for those in the fan club. I'm sure they may glean something from it. :)

WALLSTREETGENIUS
983 posts
msg #65518
Ignore WALLSTREETGENIUS
modified
7/27/2008 8:43:19 PM

Get back into the Latrene where you belong "grunt!" You're in unfamiliar water here bud. This thread's about me being glorified by my fanclub president TheRumpledOne! lol....



- RIGGS -




TheRumpledOne
6,407 posts
msg #65523
Ignore TheRumpledOne
7/28/2008 12:25:00 AM

((( THEMIGHTYRIGGS POP & DROP ))))


Fetcher[Draw COG(5,3)
Williams %R(2) 1-day ago was below -75
Williams %R(2) is above -1
Draw Williams %R(2) line at 0
Draw Williams %R(20) line at 0
Draw Williams %R(20) line at -75
Draw Volatility_Ratio line at 0.5
Draw weekly RSI(2) line at 100
Draw FI(2) line at 0

Draw Bollinger bands(50,.20)
Draw Bollinger Bands(10,.10)
Draw 3-day slope of Bollinger bands(50,.20)
Draw parabolic Sar
Draw Linear Regression Indicator(20)
Draw Bollinger bands(10)

Draw ADX(7)
Draw Bearpower on plot Bullpower
Draw Bullpower line at 0
Draw MACD(4,8)

volume is above 50000
sort column 10 ascending
chart-time 45-days
close is above 1
offset 0

set{true_range, average true range(1)}
set{ema_true_range, CEMA(average true range(1), 14)}
set{volatility_ratio, true_range / ema_true_range}
set{volatility_ratio_count, count(volatility_ratio is above 2.0, 100)}

Set{Bullpower, high minus ema(13)}
Set{Bearpower, low minus ema(13)}
set{BLb,days(BullPower is above BullPower 1 day ago,100)}
set{BLa,days(BullPower is below BullPower 1 day ago,100)}
set{BLxBL, BLa - BLb}
set{BRb,days(BearPower is above BearPower 1 day ago,100)}
set{BRa,days(BearPower is below BearPower 1 day ago,100)}
set{BRxBR, BRa - BRb}

SET{VMACDD,MACD(4,8) histogram}
set{mhis,indposition(macd(4,8) histogram,60)}
set{mhist,macd(4,8) histogram}
set{mhisb,days(mhist is above 0, 100)}
set{mhisa,days(mhist is below 0, 100)}
set{hstxhst, mhisa - mhisb}
set{var1,count(macd(4,8) histogram 1 day ago < macd histogram(4,8),1)}
set{mhisp,days(var1 < .5,100)}
set{var11,count(macd(4,8) histogram 1 day ago > macd histogram(4,8),1)}
set{mhisn,days(var11 < .5,100)}

set{ upweek, count( weekly close above weekly open, 1) }

ADD COLUMN SEPARATOR
add column sector
add column industry
ADD COLUMN SEPARATOR
add column Williams %R(2)
add column Williams %R(2) 1-day ago(1dayago)
ADD COLUMN SEPARATOR
add column volatility_ratio
add column volatility_ratio 1-day ago(1dayago)
ADD COLUMN SEPARATOR
add column PE
add column EPS
add column ROE
ADD COLUMN SEPARATOR
add column mhisp
add column mhisn
add column hstxhst
ADD COLUMN SEPARATOR
and add column VMACDD
and add column VMACDD 1-day ago(1dayago)
and add column VMACDD 2-days ago(2daysago)
ADD COLUMN SEPARATOR
add column upweek
ADD COLUMN SEPARATOR
]



================================================

You never know when this might get deleted!!

TheRumpledOne
6,407 posts
msg #65572
Ignore TheRumpledOne
7/29/2008 11:42:24 AM

WALLSTREETGENIUS
- Ignore WALLSTREETGENIUS
modified 7/28/2008 10:07:35 AM

Cello, RMBS again?...you're killing me man! LOL...Yes, the weekly looks prime for a reversal, but the weekly RSI is hugging the "0" line. Just wait for it to move up, and you'll have a nice entry. It shouldn't take too much longer with that nice breakout volume on 7/25/08, and it was well above their normal average volume. The only thing I don't like is the weekly's on the PSI & SMH. There's a lot better of variety out there Cello...I would move on if I were you.

Here, stick this into your charts. It will give you RSI(2) vs BILLY(2). Just look for the (- +) difference in values.

((( RIGGS RSI VS WILLIAMS MRI SCAN )))


Fetcher[set{RSb,days(RSI(2) is above RSI(2) 1 day ago,100)}
set{RSa,days(RSI(2) is below RSI(2) 1 day ago,100)}
set{RSxRS, RSa - RSb}
set{WLb,days(Williams %R(2) is above Williams %R(2)
1 day ago,100)}
set{WLa,days(Williams %R(2) is below Williams %R(2)
1 day ago,100)}
set{WLxWL, WLa - WLb}

NORMALIZE accumulation distribution */

set{adval, INDPOSITION(accumulation distribution, 60) * 100 }

NORMALIZE RSI(2) */

set{RSval, INDPOSITION(RSI(2), 60) * 100}

NORMALIZE williams %r(2) */

set{wrval, INDPOSITION(williams %r(2), 60) * 100 }


DRAW THE MR CCIWLR CHART

and draw adval on plot wrval
and draw rsval on plot wrval

Volume is above 50000
Sort column 2 descending

ADD COLUMN SEPARATOR
add column RSxRS
add column WLxWL
ADD COLUMN SEPARATOR
]







- WALLSTREETGENIUS -



cello13
- Ignore cello13
modified 7/28/2008 11:09:54 AM

Hi Riggs

I see, you still remember me;-) I began to read a few of your newer posts (those you haven't deleted yet...:-) and I was wondering about Williams %R(2). Then I had a look at it.

E.G.: Before UBS and CS Group turned up in mid of July they developed a funny signal. Over weeks, they built bullish divergences in RSI(2) and Willi(2) (daily chart). Then, mid July, RSI(2) went close to zero and Willi(2) started to move upwards while price still went down. They moved nice from CHF 40 to 53 (CSGN) and CHF 17.50 to 23.50 (UBSN). Now I'm thinking about how to identify such stocks but can't code it. The funny thing is, if you look at the chart listed in USA you can't see that signal... Crazy!

I'll leave RMBS as you recommanded. But I'm looking for some literature how to work with Willi(2) correctly. I couldn't find such a book... Any hints are welcome, either for literature or for a filter... THX



WALLSTREETGENIUS
- Ignore WALLSTREETGENIUS 7/28/2008 11:12:12 AM

Remember, you're looking for Billy(2) increasing, while
RSI(2) is decreasing for entries, but don't use this
exclusively as a stand alone.

===========================================


((( RIGGS RSI VS WILLIAMS DIVERGENCE SCAN )))


Fetcher[Williams %R(2) is above Williams %R(2) 1-day ago
RSI(2) is below RSI(2) 1-day ago
Volume is above 50000
Sort column 2 descending

ADD COLUMN SEPARATOR
add column RSxRS
add column WLxWL
ADD COLUMN SEPARATOR

set{RSb,days(RSI(2) is above RSI(2) 1 day ago,100)}
set{RSa,days(RSI(2) is below RSI(2) 1 day ago,100)}
set{RSxRS, RSa - RSb}
set{WLb,days(Williams %R(2) is above Williams %R(2)
1 day ago,100)}
set{WLa,days(Williams %R(2) is below Williams %R(2)
1 day ago,100)}
set{WLxWL, WLa - WLb}
]






- WALLSTREETGENIUS -





WALLSTREETGENIUS
- Ignore WALLSTREETGENIUS
modified 7/28/2008 11:18:53 AM

Cello -

You're not going to find anything on the internet OR any bookshelf on Amazon.com because this is solely a creation of WALLSTREETGENIUS. I started researching Billy(2) about 14-months year ago, and have been trading with it for just about a year now. It wont take long before it catches on, and finally exposes how obsolete the daily RSI(2) really is.



RIGGS



cello13
- Ignore cello13 7/28/2008 11:35:34 AM

I'm sure, Willi(2) or RSI(2) aren't the only indicators to use. I thought about adding volatility with ADR, trending of stocks (above ma(200) or so...). But this won't help me to time the entry or selling point. I need another indicator but don't know which. I tried Stochastics with 4,3,2 which show nice swings, but that didn't help me yet. MACD also seems not being the right one... What would you reccomand?

I knew that I won't find any book about Willi(2), but there should have been one about Willi(14) as like as for RSI(14)... Not?!

Thx



WALLSTREETGENIUS
- Ignore WALLSTREETGENIUS 7/28/2008 12:26:08 PM

Cello -

Didn't you look at my filter above? As you can see, I use COG, (center of gravity) Williams(2), weekly RSI(2), Force Index(2), Williams(20), MACD(4,8,9). This is an arsenal that cant be denied!

As for RSI(14) or Williams(14)...well, I have a problem with those period types. I'm someone that knows and needs to get in and out of a stock at the absolute beginning and end of a run. Those two wont help you do that in this kind of market. Their fine for that last bull market we had in '07, but for the most part, you can only use those periods for divergence only IMHO. Now, if you're in it for the long haul, then try using a 7-day period on Will & RSI. They will get you in & out with much more clarity as opposed to the 14-day. Dr. Alexander Elder swears by it, therefore so do I. I still have scans and filters based on the 7-day, while waiting for the next Bull.



- RIGGS -



cello13
- Ignore cello13 7/28/2008 1:36:18 PM

Riggs

Thanks for your advice. So I have to learn to handle these indicators or could you tell me what is the most important to look for while using them? Sorry for my questions but I try to understand a little bit of your trading style and I'm sure there are people out there who are interested in what you're writing too. Thx.



WALLSTREETGENIUS
- Ignore WALLSTREETGENIUS
modified 7/28/2008 3:30:49 PM

So I have to learn to handle these indicators or could you tell me what is the most important to look for while using them?

======================================

Cello -

You can find out how to use these indicators & oscillators in many books, and they're all over the internet. But if you've paid attention to any of my recent posts, you would already know how to "I" use these technicals. Knowledge is power man, and when it comes to technicals, the best knowledge is the kind you accumulate on your own IMO.

Peace,



- RIGGS -



WALLSTREETGENIUS
- Ignore WALLSTREETGENIUS 7/28/2008 7:40:26 PM

Here, stick this into your charts. It will give you RSI(2) vs BILLY(2). Just look for the (- +) difference in values.

((( RIGGS RSI VS WILLIAMS MRI SCAN )))



Fetcher[set{RSb,days(RSI(2) is above RSI(2) 1 day ago,100)}
set{RSa,days(RSI(2) is below RSI(2) 1 day ago,100)}
set{RSxRS, RSa - RSb}
set{WLb,days(Williams %R(2) is above Williams %R(2)
1 day ago,100)}
set{WLa,days(Williams %R(2) is below Williams %R(2)
1 day ago,100)}
set{WLxWL, WLa - WLb}

NORMALIZE accumulation distribution */

set{adval, INDPOSITION(accumulation distribution, 60) * 100 }

NORMALIZE RSI(2) */

set{RSval, INDPOSITION(RSI(2), 60) * 100}

NORMALIZE williams %r(2) */

set{wrval, INDPOSITION(williams %r(2), 60) * 100 }


DRAW THE MR CCIWLR CHART

and draw adval on plot wrval
and draw rsval on plot wrval

Volume is above 50000
Sort column 2 descending

ADD COLUMN SEPARATOR
add column RSxRS
add column WLxWL
ADD COLUMN SEPARATOR
]








- WALLSTREETGENIUS -


WALLSTREETGENIUS
983 posts
msg #65599
Ignore WALLSTREETGENIUS
modified
7/30/2008 10:19:59 AM

Here Mr. President (TRO)....I made this with YOU in mind, and
just for you! LOL...


==============================================

((( THEMIGHTYRIGGS RSI(2) INFERIOR FILTER )))

Fetcher[WILLIAMS %R(2) IS INCREASING LAST 2-DAYS
RSI(2) IS DECREASING LAST 2-DAYS
SORT COLUMN 9 DESCENDING
VOLUME IS ABOVE 100000
CHART-TIME 45 DAYS
CLOSE IS ABOVE 5
OFFSET 1

Draw Linear Regression Indicator(20)
COG(5,3) is below 0
Draw Weekly RSI(2) line at 99
Draw Weekly RSI(2)
Draw Weekly Williams %R(2) line at -75
Draw FI(2) line at 0
Draw Bearpower on plot Bullpower
Draw Bullpower line at 0
Draw MACD(4,8)
Draw VMACDD line at 0
Draw Williams %R(20) line at -75

set{RSb,days(RSI(2) is above RSI(2) 1 day ago,100)}
set{RSa,days(RSI(2) is below RSI(2) 1 day ago,100)}
set{RSxRS, RSa - RSb}
set{WLb,days(Williams %R(2) is above Williams %R(2)
1 day ago,100)}
set{WLa,days(Williams %R(2) is below Williams %R(2)
1 day ago,100)}
set{WLxWL, WLa - WLb}

ADD COLUMN SEPARATOR
add column RSxRS
add column WLxWL
ADD COLUMN SEPARATOR
]




Doesn't matter how you "offset" it, OR debate it...
numbers don't lie!...and I've been saying it
for over a year now...



- WALLSTREETGENIUS -

TheRumpledOne
6,407 posts
msg #65608
Ignore TheRumpledOne
7/30/2008 7:14:08 PM

((( THEMIGHTYRIGGS RSI(2) INFERIOR FILTER )))


Fetcher[WILLIAMS %R(2) IS INCREASING LAST 2-DAYS
RSI(2) IS DECREASING LAST 2-DAYS
SORT COLUMN 9 DESCENDING
VOLUME IS ABOVE 100000
CHART-TIME 45 DAYS
CLOSE IS ABOVE 5
OFFSET 1

Draw Linear Regression Indicator(20)
COG(5,3) is below 0
Draw Weekly RSI(2) line at 99
Draw Weekly RSI(2)
Draw Weekly Williams %R(2) line at -75
Draw FI(2) line at 0
Draw Bearpower on plot Bullpower
Draw Bullpower line at 0
Draw MACD(4,8)
Draw VMACDD line at 0
Draw Williams %R(20) line at -75

set{RSb,days(RSI(2) is above RSI(2) 1 day ago,100)}
set{RSa,days(RSI(2) is below RSI(2) 1 day ago,100)}
set{RSxRS, RSa - RSb}
set{WLb,days(Williams %R(2) is above Williams %R(2)
1 day ago,100)}
set{WLa,days(Williams %R(2) is below Williams %R(2)
1 day ago,100)}
set{WLxWL, WLa - WLb}

ADD COLUMN SEPARATOR
add column RSxRS
add column WLxWL
ADD COLUMN SEPARATOR
]



OH the irony!

WALLSTREETGENIUS
983 posts
msg #65634
Ignore WALLSTREETGENIUS
modified
7/31/2008 12:23:31 PM

YOU'RE GONNA WANT THIS ONE TOO MR. PRESIDENT!
...MY VERY BEST TO DATE...

=============================================


As you already know, I have an uncanny way of finding extreme bottoms & tops on charts. I've already proven that RSI(2) on a daily chart is inferior to my WILLIAMS %R(2), and if you've missed any of that, I strongly encourage you to read about it because your future entries and exits will NEVER be the same!

Now that we know RSI(2) is obsolete, and my Billy(2) is your gateway to profits...I thought it was time to share my most powerful rock bottom filter. Avery (TRO) just the other day took a cheap shot at me about using RSI(2) on my charts as a weekly scan, by saying something like...

" I'm glad you see the light on RSI(2)! "

I had to laugh, because I knew I hadn't released this bit of information yet. So if you now think that my Williams %R(2) is superior over RSI(2) on daily charts, just wait till you see how powerful Billy(2) is over RSI(2) on WEEKLY charts! I welcome you to look at all the charts you can drum up and look for Weekly Williams(2) increasing, while the RSI(2) is falling, or hugging that zero line.

Now, there will be a select few that don't pop, but the ones that don't are the one's that are too early. Meaning, make sure your Stochastics(5,3), COG(5,3), or what ever oscillator you use is BELOW it's lower reference point (below "0" or 25). That's the difference maker! Also, just wait till you see what happens on your HOURLY charts when these two diverge from one another. It's truely amazing! At times on your hourly charts you'll see the opposite happen with RSI going up while Billy is declining. It doesn't happen often, but it works the same way when it's at the bottom of a chart. But at the top of charts we already know that's an early warning to get out of a stock.

If RSI(2) is the "little indicator that could"...then, Williams(2) is the "BIG ENGINE THAT DID!"

Just look at the performance (far right of dashboard) of the last 3-days!...
you won't believe your eyes!!!

NOTE: Many of the weekly scans of WRSI(2) are going up,
but if you look at your regular platform charts, it is falling.
Don't know why SF does this, but it still works out great!


((( THEMIGHTYRIGGS ABSOLUTE BOTTOM FILTER )))


Fetcher[Weekly Williams %R(2) is above Weekly Williams %R(2)
1-day ago and Weekly Williams %R(2) is below Weekly %R(2) 2-day
ago and Weekly RSI(2) is below Weekly RSI(2) 1-day ago

Draw Bollinger bands(50,.20)
Draw Bollinger Bands(10,.10)
Draw 3-day slope of Bollinger bands(50,.20)
Draw parabolic Sar
Draw Linear Regression Indicator(20)
Draw Bollinger bands(10)

Draw COG(5,3)
Draw Weekly RSI(2) line at 99
Draw Weekly RSI(2) line at 0
Draw FI(2) line at 0

NORMALIZE accumulation distribution */

set{adval, INDPOSITION(accumulation distribution, 60) * 100 }

NORMALIZE RSI(2) */

set{RSval, INDPOSITION(RSI(2), 60) * 100}

NORMALIZE williams %r(2) */

set{wrval, INDPOSITION(williams %r(2), 60) * 100 }


DRAW THE MR CCIWLR CHART

and draw adval on plot wrval
and draw rsval on plot wrval

Draw Bearpower on plot Bullpower
Draw Bullpower line at 0
Draw MACD(4,8)
Draw VMACDD line at 0
Draw Williams %R(20) line at 0
Draw Williams %R(20) line at -75

volume is above 100000
sort column 29 descending
chart-time 45-days
close is above 10
offset 3

set{WRSb,days(weekly RSI(2) is above weekly RSI(2) 1 day ago,100)}
set{WRSa,days(weekly RSI(2) is below weekly RSI(2) 1 day ago,100)}
set{WRSxWRS, WRSa - WRSb}
set{WWLb,days(weekly williams %R(2) is above weekly Williams %R(2) 1 day ago,100)}
set{WWLa,days(weekly Williams %R(2) is below weekly Williams %R(2) 1 day ago,100)}
set{WWLxWWL, WWLa - WWLb}

Set{Bullpower, high minus ema(13)}
Set{Bearpower, low minus ema(13)}
set{BLb,days(BullPower is above BullPower 1 day ago,100)}
set{BLa,days(BullPower is below BullPower 1 day ago,100)}
set{BLxBL, BLa - BLb}
set{BRb,days(BearPower is above BearPower 1 day ago,100)}
set{BRa,days(BearPower is below BearPower 1 day ago,100)}
set{BRxBR, BRa - BRb}

set{RSb,days(RSI(2) is above RSI(2) 1 day ago,100)}
set{RSa,days(RSI(2) is below RSI(2) 1 day ago,100)}
set{RSxRS, RSa - RSb}
set{WLb,days(Williams %R(2) is above Williams %R(2)
1 day ago,100)}
set{WLa,days(Williams %R(2) is below Williams %R(2)
1 day ago,100)}
set{WLxWL, WLa - WLb}

SET{VMACDD,MACD(4,8) histogram}
set{mhis,indposition(macd(4,8) histogram,60)}
set{mhist,macd(4,8) histogram}
set{mhisb,days(mhist is above 0, 100)}
set{mhisa,days(mhist is below 0, 100)}
set{hstxhst, mhisa - mhisb}
set{var1,count(macd(4,8) histogram 1 day ago < macd histogram(4,8),1)}
set{mhisp,days(var1 < .5,100)}
set{var11,count(macd(4,8) histogram 1 day ago > macd histogram(4,8),1)}
set{mhisn,days(var11 < .5,100)}

ADD COLUMN SEPARATOR
add column industry
ADD COLUMN SEPARATOR
add column adval
ADD COLUMN SEPARATOR
add column WRSXWRS
add column WWLXWWL
add column weekly RSI(2)
add column weekly Williams %R(2)
ADD COLUMN SEPARATOR
add column RSXRS
add column WLXWL
ADD COLUMN SEPARATOR
add column BLxBL
add column BRxBR
ADD COLUMN SEPARATOR
add column mhisp
add column mhisn
add column hstxhst
ADD COLUMN SEPARATOR
add column PE
add column EPS
add column ROE
ADD COLUMN SEPARATOR
]







- WALLSTREETGENIUS -



StockFetcher Forums · Filter Exchange · WALLSTREETGENIUS / RIGGS filter/post collection<< 1 2 >>Post Follow-up

*** Disclaimer *** StockFetcher.com does not endorse or suggest any of the securities which are returned in any of the searches or filters. They are provided purely for informational and research purposes. StockFetcher.com does not recommend particular securities. StockFetcher.com, Vestyl Software, L.L.C. and involved content providers shall not be liable for any errors or delays in the content, or for any actions taken based on the content.


Copyright 2022 - Vestyl Software L.L.C.Terms of Service | License | Questions or comments? Contact Us
EOD Data sources: DDFPlus & CSI Data Quotes delayed during active market hours. Delay times are at least 15 mins for NASDAQ, 20 mins for NYSE and Amex. Delayed intraday data provided by DDFPlus


This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.